Why Can The Sprayer Spray A Small Amount Of Water Into A Fine Mist?

Why Can The Sprayer Spray A Small Amount Of Water Into A Fine Mist?

The principle of the sprayer is actually very simple and can be explained by air pressure.

When the air is ejected from the small hole, the air velocity above the straw is high and the pressure is low;
The bottom of the straw is also affected by the atmospheric pressure, and the liquid rises under the action of the atmospheric pressure and is ejected.

This is Bernoulli's principle.

To put it simply, it is a sentence, when the flow is at a constant height, the flow rate is high and the pressure is low.

Fluid will automatically flow from high pressure to low pressure. When passing through the trident pipe, the low-speed flowing water flows to the high-speed flowing air.
Water is torn into small droplets by high-speed air
(Imagine that the water flowing out of the faucet is slow at first, and it is a water column; but then it becomes drop by drop after the speed gradually increases). When these small water droplets are sprayed out, they become fog.

What are the advantages of a sprayer?

1. Long range, wide coverage, high work efficiency, and can achieve precise spraying.
2. The sprayed mist particles are small, and when in contact with the dust, a moist mist is formed, which can quickly suppress the dust.
3. The supporting power is flexible. It can be supplied by three-phase 380V mains or a diesel generator set.
4. It can be fixedly installed on the concrete pouring platform, and can also be installed on the transport vehicle with the matching diesel generator set.
5. Flexible operation, remote control or manual control, and free adjustment of horizontal rotation and spray angle, safe and reliable use
6. The water consumption can be saved by 70%-80% compared with other dust suppression spraying equipment (spray gun, sprinkler), and the water mist coverage area is much larger than other dust suppression spraying equipment.
7. The shooting range is 60m-200m optional, and can be configured according to the actual requirements of customers.